Skip to main content

Unimag Technical

Unimag applicator spraying protective coating onto a concrete retaining wall with an airless spray rig on a Dubai site

Specialist coatings & applications contractorUAE · Since 1989

Concreteprotectionspecialists.

Concrete repair, anti-carbonation coatings, waterproofing and industrial flooring, applied by our own crews on bridges, car parks, reservoirs and plants across the UAE.

Approved by RTA · DEWA · Dubai Municipality · DOT Abu Dhabi

About Unimag

Unimag Technical Co. L.L.C. is a Dubai specialist coatings & applications contractor: protective coatings, concrete repair, waterproofing, flooring and facade systems.

Since 1989 we have protected bridges, highways, reservoirs, car parks, ports and industrial plants for oil companies, civil contractors, government departments and private clients. We are an approved applicator for the major coating manufacturers, and we give independent advice on which system a structure actually needs.

More about Unimag

Established in Dubai. 35+ years applying protective systems to UAE concrete.

  • 60M+ m² of concrete coated
  • 85%+ of UAE bridges carry our coatings
  • 8 manufacturers approve us as applicator

Approved by

Roads & Transport Authority Department of Transport, Abu Dhabi DEWADubai Electricity & Water Authority DMDubai Municipality

Approved applicator for

Fosroc · Hempel · Jotun · BASF · Chemipaint · Stoncor · Corrotech · Isocrete

From raw concrete to a protected structure.

  1. 01Inspect & repairPiers tested, damaged concrete repaired and primed.
  2. 02ProtectAnti-carbonation system applied along the deck soffit.
  3. 03Finish & hand overTopcoat, inspection records and warranty.

What we do

Specialist coatings & applications: five disciplines, ten systems, all applied by our own crews.

All services
  1. 01Protective CoatingsCoatings that keep CO₂, chlorides, UV and water out of concrete.
  2. 02Concrete Repair & StrengtheningRestore damaged concrete and give the structure back its strength.
  3. 03WaterproofingSeamless, trafficable membranes for decks, roofs and structures.
  4. 04FlooringIndustrial, decorative and sports floors, and finished concrete.
  5. 05Facades & CeilingsInsulated facade systems and acoustic ceilings.
A concrete core sample separated into its protective coating layers
05Topcoat50–100 µm
04Intermediate coat150–300 µm
03Primer30–75 µm
02Repair mortarAs required
01SubstrateExisting concrete

Every layer, specified and applied.

A protective system is only as good as its weakest coat. We survey and test the concrete, repair what is damaged, then build the system up layer by layer to the manufacturer's data sheet.

Typical anti-carbonation build-up shown. Every system is specified per project.

Send your specification

Carbonated. Repaired. Protected.

Drag across the column to see what a repair and coating system does to failing concrete.

Before: spalled bridge column with exposed corroded rebar and rust stains
After: the same column repaired and coated in a smooth protective finish
BeforeCarbonated, spalled, rebar corroding AfterRepaired and coated

Illustrative images.

From survey to handover, one accountable team.

The same Unimag team inspects your structure, specifies the system, applies it and hands it over.

  1. Engineer measuring carbonation depth on a concrete core sprayed with phenolphthalein indicator
    Survey

    Inspect and test

    Carbonation depth, concrete cover, chlorides and the condition of every surface, so we fix the cause, not just the symptom.

  2. Bridge drawings, data sheets and a coating sample board on a site office table
    Specify

    Choose the system

    A manufacturer-approved system, method statement and programme, submitted for the consultant's approval.

  3. Applicator spraying protective coating onto a concrete bridge pier with an airless spray gun
    Apply

    Our own crews

    Surface preparation and application by trained Unimag applicators, to the manufacturer's data sheet and the project specification.

  4. Inspector carrying out a pull-off adhesion test on coated concrete
    Inspect

    Test and hand over

    Film thickness and pull-off adhesion tests, signed inspection records and the warranty at handover.

Working with the region's leading contractors.

Main contractors, developers and authorities who have trusted Unimag with their structures.

Send us the drawings. We'll specify the system.

Share your drawings, specification or BOQ. Our technical team replies with a recommended system, method statement and quotation.