Skip to main content

Unimag Technical

Sports Flooring by Unimag Technical in the UAE

Sports flooring & court surfacing

Acrylic and polyurethane sports surfaces for outdoor courts, indoor halls, gyms and running tracks, built to take UAE sun and constant play.

Used on
  • Tennis & basketball courts
  • School sports halls
  • Gyms & fitness
  • Multi-use games areas
  • Running tracks

Approved by RTA · DEWA · Dubai Municipality · DOT Abu Dhabi

Surfaces built for play and the climate

A sports surface has to give players the right grip, ball bounce and comfort underfoot, while surviving sun, heat, rain and heavy daily use.

Outdoor courts use layered acrylic systems over asphalt or concrete, with optional cushion layers for comfort. Indoor halls and gyms use seamless polyurethane floors that are resilient and easy to clean.

Colours and line markings are part of the system, applied to the governing body's layout for each sport.

Sports Flooring being applied on site
Sports Flooring in progress
  • 01

    Right grip and bounce

    Textures chosen for the sport and level of play.

  • 02

    UV and heat stable

    Colours and surfaces made for UAE sun.

  • 03

    Comfort options

    Cushioned layers reduce strain on joints.

  • 04

    Accurate markings

    Lines set out for each sport's layout.

Layers you play on

  • Sun & heat
  • Rain
  • Play & wear
  1. 01Bare baseSun, rain and play act on a hard, uneven base.
  2. 02WornThe surface cracks, fades and loses grip.
  3. 03Court readyPrimer, cushion, colour coats and lines: grippy, comfortable and bright.

The system

  • Colour coat
  • Texture coat
  • Cushion layer
  • Primer

How we build it

Survey, preparation, application and inspection by one accountable Unimag team.

  1. Base assessment: Sports Flooring
    01

    Base assessment

    Levels, falls, drainage and the condition of the asphalt or concrete base are checked.

  2. Repairs & levelling: Sports Flooring
    02

    Repairs & levelling

    Cracks and low spots are repaired so water does not pond on the court.

  3. Cushion & base coats: Sports Flooring
    03

    Cushion & base coats

    Primer, optional cushion layers and resurfacer build up the body of the surface.

  4. Colour coats: Sports Flooring
    04

    Colour coats

    Textured colour coats are squeegee-applied in the chosen colours.

  5. Line marking: Sports Flooring
    05

    Line marking

    Lines are set out and painted to the sport's official layout, then inspected.

Typical build-up

  • Line markingSet out per sport
  • Textured colour coatsGrip, colour and UV stability
  • Cushion layer (optional)Comfort underfoot
  • Primer & resurfacerLevels and seals the base
  • Asphalt or concrete baseRepaired and levelled

Typical system shown. Every system is specified per project to the manufacturer's data sheet.

Where we apply it

Typical projects and spaces across the UAE where we install it.

  • Sports Flooring for Outdoor courts

    Outdoor courts

    Tennis, basketball and multi-use courts.

  • Sports Flooring for Indoor halls

    Indoor halls

    School and club sports halls.

  • Sports Flooring for Running tracks

    Running tracks

    Tracks and jogging paths.

  • Sports Flooring for Gyms & fitness

    Gyms & fitness

    Training and fitness areas.

Questions we are asked

Can a sports court be resurfaced without rebuilding it?

Often yes. If the base is sound, we repair cracks and low spots and apply a new acrylic system over the existing surface.

Which surface is best for an outdoor court in the UAE?

Acrylic systems are the usual choice outdoors because they are UV-stable and can include cushion layers for comfort. We recommend the build-up based on the sport, level of play and budget.

Do you do the line marking?

Yes. Lines are set out and painted to the official layout for each sport, including multi-sport layouts in different colours.

Which systems do you use?

We are an approved applicator for Fosroc, Hempel, Jotun, BASF, Chemipaint, Stoncor, Corrotech and Isocrete. We recommend a system to suit the structure and use, or apply the system your consultant has specified.

What do we receive at handover?

Inspection and test records for the work carried out, together with the manufacturer's warranty documentation for the system applied.

Talk to our technical team

Send drawings, a specification or a BOQ.

Request a quote +971 4 333 8000info@unimag.ae

Get the right system for your project.

Share your drawings, specification or BOQ and our technical team will recommend a system and send a method statement and quotation.