Skip to main content

Unimag Technical

Polyurea Coatings by Unimag Technical in the UAE

Spray-applied polyurea waterproofing & protection

A seamless, highly elastic membrane sprayed on in a single pass that cures in seconds, for roofs, podiums, tanks and structures that need tough, fast waterproofing.

Used on
  • Roofs & terraces
  • Podium decks
  • Water tanks
  • Basements & foundations
  • Industrial structures

Approved by RTA · DEWA · Dubai Municipality · DOT Abu Dhabi

Why polyurea

Polyurea is sprayed with heated, high-pressure plural-component equipment and cures within seconds to a seamless membrane. There are no joints or laps for water to find, and areas can be back in service very quickly.

It is very elastic and tough, so it bridges cracks and copes with the movement and temperature swings of UAE roofs, while resisting abrasion, impact and many chemicals.

Because the membrane follows any shape, details such as upstands, drains and penetrations become part of one continuous layer. A UV-stable topcoat is added where it is exposed to the sun.

Polyurea Coatings being applied on site
Polyurea Coatings in progress
  • 01

    Seamless

    One continuous membrane with no laps or joints.

  • 02

    Cures in seconds

    Fast return to service and less downtime.

  • 03

    Highly elastic

    Bridges cracks and moves with the structure.

  • 04

    Tough and resistant

    Handles abrasion, impact and many chemicals.

One seamless membrane

  • Rain & ponding
  • UV & heat
  • Movement
  1. 01Exposed roofSun, rain and ponding water work on the bare slab and its joints.
  2. 02LeakingWater finds cracks and joints and soaks down through the slab.
  3. 03SprayedPrimer, polyurea membrane and UV topcoat: seamless and watertight.

The system

  • UV topcoat
  • Polyurea membrane
  • Primer

How we apply it

Survey, preparation, application and inspection by one accountable Unimag team.

  1. Survey & testing: Polyurea Coatings
    01

    Survey & testing

    Substrate condition, moisture and details are checked and the system is specified.

  2. Preparation & repairs: Polyurea Coatings
    02

    Preparation & repairs

    The surface is cleaned and profiled and defects, cracks and joints are repaired.

  3. Primer: Polyurea Coatings
    03

    Primer

    A primer suited to the substrate seals it and gives the membrane a strong bond.

  4. Polyurea spray: Polyurea Coatings
    04

    Polyurea spray

    The membrane is sprayed to the specified thickness, detailing upstands and penetrations.

  5. Topcoat & inspection: Polyurea Coatings
    05

    Topcoat & inspection

    A UV-stable topcoat where exposed, then thickness checks and inspection.

Typical build-up

  • UV topcoatColour-stable, where exposed
  • Polyurea membraneSeamless, elastic, sprayed
  • PrimerSeals and bonds
  • Prepared substrateConcrete, metal or screed

Typical system shown. Every system is specified per project to the manufacturer's data sheet.

Where we apply it

Typical structures across the UAE that need this protection.

  • Polyurea Coatings for Roofs & terraces

    Roofs & terraces

    Exposed slabs under sun and rain.

  • Polyurea Coatings for Water features & tanks

    Water features & tanks

    Basins, ponds and tanks that must hold water.

  • Polyurea Coatings for Podium decks

    Podium decks

    Slabs over occupied or parking space.

  • Polyurea Coatings for Industrial structures

    Industrial structures

    Bunds, trenches and plant areas.

Questions we are asked

How fast does polyurea cure?

Pure polyurea gels within seconds and can usually take light foot traffic within hours, which keeps downtime short. Full cure and the exact times depend on the product and conditions.

Is polyurea suitable for the UAE heat?

Yes. Its elasticity copes with thermal movement, and where it is exposed to direct sun we add a UV-stable topcoat to keep the colour and surface stable.

Can polyurea be used in water tanks?

Yes, with a grade approved for the purpose. For potable water we use systems certified for contact with drinking water.

Which systems do you use?

We are an approved applicator for Fosroc, Hempel, Jotun, BASF, Chemipaint, Stoncor, Corrotech and Isocrete. We recommend a system to suit the structure and use, or apply the system your consultant has specified.

What do we receive at handover?

Inspection and test records for the work carried out, together with the manufacturer's warranty documentation for the system applied.

Talk to our technical team

Send drawings, a specification or a BOQ.

Request a quote +971 4 333 8000info@unimag.ae

Protect your structure for the long term.

Share your drawings, specification or BOQ and our technical team will recommend a system and send a method statement and quotation.