Skip to main content

Unimag Technical

Stamped & Coloured Concrete by Unimag Technical in the UAE

Stamped, coloured & precision-finished concrete

Concrete that looks like stone, slate or brick but performs like a single slab, for driveways, pool decks, walkways and landscape projects.

Used on
  • Driveways
  • Pool decks
  • Walkways & plazas
  • Landscape projects
  • Villa compounds

Approved by RTA · DEWA · Dubai Municipality · DOT Abu Dhabi

The look of stone, the strength of concrete

Stamped concrete is placed, coloured and imprinted while it is still plastic, so the pattern is part of the slab rather than separate pavers that can shift and weed.

Colour hardeners and release agents give a rich, layered colour and an antique finish, and a sealer protects the surface from UV, stains and wear.

Precision-finished and coloured concrete covers the same idea without the imprint: crisp, consistent surfaces for paths, plazas and architectural slabs.

Stamped & Coloured Concrete being applied on site
Stamped & Coloured Concrete in progress
  • 01

    Natural look

    Stone, slate and brick patterns in many colours.

  • 02

    One solid slab

    No loose pavers to sink, shift or grow weeds.

  • 03

    Low maintenance

    Sealed against stains, UV and wear.

  • 04

    Quick to install

    Large areas finished in one pour.

Colour, pattern, protection

  • Sun & UV
  • Stains
  • Traffic
  1. 01Plain slabGrey concrete that fades, stains and wears in the sun.
  2. 02WeatheredUV, oil and traffic dull and mark the open surface.
  3. 03FinishedColour hardener, release and sealer: rich, patterned and protected.

The system

  • Sealer
  • Release agent
  • Colour hardener

How we make it

Survey, preparation, application and inspection by one accountable Unimag team.

  1. Design & set-out: Stamped & Coloured Concrete
    01

    Design & set-out

    Pattern, colours and levels are agreed and the area is set out with falls for drainage.

  2. Base & formwork: Stamped & Coloured Concrete
    02

    Base & formwork

    The sub-base is compacted and edges, joints and reinforcement are prepared.

  3. Pour & colour: Stamped & Coloured Concrete
    03

    Pour & colour

    Concrete is placed and a colour hardener is broadcast and floated into the surface.

  4. Stamp: Stamped & Coloured Concrete
    04

    Stamp

    Release agent goes on and the stamping mats are pressed in at the right moment.

  5. Wash & seal: Stamped & Coloured Concrete
    05

    Wash & seal

    The surface is cleaned, joints are cut and a protective sealer is applied.

Typical build-up

  • SealerUV and stain protection
  • Release agentAntique highlights
  • Colour hardenerDense, coloured surface
  • Concrete slabReinforced, with joints

Typical system shown. Every system is specified per project to the manufacturer's data sheet.

Where we apply it

Typical projects and spaces across the UAE where we install it.

  • Stamped & Coloured Concrete for Driveways

    Driveways

    Villa and compound driveways.

  • Stamped & Coloured Concrete for Pool decks

    Pool decks

    Patterned, sealed surrounds.

  • Stamped & Coloured Concrete for Walkways & plazas

    Walkways & plazas

    Public realm and landscape paths.

  • Stamped & Coloured Concrete for Landscape features

    Landscape features

    Courtyards and garden areas.

Questions we are asked

Is stamped concrete slippery around pools?

We use textured patterns and can add anti-slip additive to the sealer for pool decks and wet areas.

How long does the colour last?

Colour hardeners give a durable, dense coloured surface. Resealing every few years, depending on exposure and traffic, keeps the colour rich and the surface protected.

Will it crack?

Like all concrete it can crack, so we place control joints in planned positions, often hidden in the pattern, to control where movement happens.

Which systems do you use?

We are an approved applicator for Fosroc, Hempel, Jotun, BASF, Chemipaint, Stoncor, Corrotech and Isocrete. We recommend a system to suit the structure and use, or apply the system your consultant has specified.

What do we receive at handover?

Inspection and test records for the work carried out, together with the manufacturer's warranty documentation for the system applied.

Talk to our technical team

Send drawings, a specification or a BOQ.

Request a quote +971 4 333 8000info@unimag.ae

Get the right system for your project.

Share your drawings, specification or BOQ and our technical team will recommend a system and send a method statement and quotation.