Skip to main content

Unimag Technical

Tank Coatings & Linings by Unimag Technical in the UAE

Tank coatings & linings

Protective linings that keep water in, keep contamination out and protect the concrete or steel of tanks, reservoirs and vessels.

Used on
  • Potable water tanks
  • Reservoirs
  • Wastewater & STPs
  • Fire water tanks
  • Industrial vessels

Approved by RTA · DEWA · Dubai Municipality · DOT Abu Dhabi

What a lining protects

Water attacks concrete and steel from the inside. Soft or treated water leaches the cement paste, chlorides and sulphates corrode the reinforcement, and wastewater adds aggressive chemicals and gases.

A tank lining forms an impermeable, chemical-resistant barrier on the inside face. It stops leaks, protects the structure and keeps the stored water clean.

For drinking water we use lining systems certified for contact with potable water. For wastewater and industrial tanks the system is chosen for the chemicals and temperatures involved.

Tank Coatings & Linings being applied on site
Tank Coatings & Linings in progress
  • 01

    Watertight

    Stops leakage through cracks and joints.

  • 02

    Protects the structure

    Shields concrete and steel from aggressive water.

  • 03

    Safe for drinking water

    Certified systems for potable water contact.

  • 04

    Easy to clean

    Smooth, hygienic interior surfaces.

Keeping the water in and the wall sound

  • Water
  • Chlorides & sulphates
  • Chemicals
  1. 01Unlined wallStored water and its chemicals press against bare concrete.
  2. 02LeachingWater soaks into the wall, attacks the paste and reaches the steel.
  3. 03LinedPrimer and lining coats: watertight, protected and easy to clean.

The system

  • Lining topcoat
  • Lining base coat
  • Primer

How we line it

Survey, preparation, application and inspection by one accountable Unimag team.

  1. Inspection: Tank Coatings & Linings
    01

    Inspection

    The empty tank is inspected for cracks, leaks, corrosion and previous coatings.

  2. Blasting & preparation: Tank Coatings & Linings
    02

    Blasting & preparation

    Surfaces are abrasive-blasted or water-jetted to remove contamination and give a profile.

  3. Repairs: Tank Coatings & Linings
    03

    Repairs

    Cracks, joints and defective concrete are repaired before the lining.

  4. Lining coats: Tank Coatings & Linings
    04

    Lining coats

    Primer and lining coats are applied to the specified thickness, in confined-space conditions.

  5. Holiday testing & handover: Tank Coatings & Linings
    05

    Holiday testing & handover

    Thickness and holiday (pinhole) tests confirm a continuous lining before handover.

Typical build-up

  • Lining topcoatSmooth, hygienic, impermeable
  • Lining base coatChemical-resistant barrier
  • PrimerSeals and bonds
  • Prepared tank wallBlasted and repaired

Typical system shown. Every system is specified per project to the manufacturer's data sheet.

Where we apply it

Typical structures across the UAE that need this protection.

  • Tank Coatings & Linings for Potable water tanks

    Potable water tanks

    Building and community water tanks.

  • Tank Coatings & Linings for Reservoirs

    Reservoirs

    Large water storage structures.

  • Tank Coatings & Linings for Wastewater & STPs

    Wastewater & STPs

    Tanks and channels in treatment plants.

  • Tank Coatings & Linings for Fire & process water

    Fire & process water

    Fire water and industrial process tanks.

Related projects

Work from Unimag's project record. Photos are illustrative until project photography is added.

All projects

Questions we are asked

Are your linings safe for drinking water?

For potable water tanks we use lining systems certified for contact with drinking water, applied and cured to the manufacturer's requirements.

How long does the tank need to be out of service?

It depends on the size, the condition and the system's curing time. We plan preparation, lining and curing to keep the outage as short as possible.

How do you make sure there are no pinholes?

Dry film thickness is checked throughout and the finished lining is holiday-tested to find and repair any pinholes before handover.

Which systems do you use?

We are an approved applicator for Fosroc, Hempel, Jotun, BASF, Chemipaint, Stoncor, Corrotech and Isocrete. We recommend a system to suit the structure and use, or apply the system your consultant has specified.

What do we receive at handover?

Inspection and test records for the work carried out, together with the manufacturer's warranty documentation for the system applied.

Talk to our technical team

Send drawings, a specification or a BOQ.

Request a quote +971 4 333 8000info@unimag.ae

Protect your structure for the long term.

Share your drawings, specification or BOQ and our technical team will recommend a system and send a method statement and quotation.