
Epoxy flooring for industry, warehouses & garages
Seamless, hard-wearing resin floors that stand up to forklifts, chemicals and constant cleaning, with safety walkways and zones built into the finish.
- Warehouses
- Factories & plants
- Workshops & garages
- Food & pharma
- Exhibition halls
Approved by RTA · DEWA · Dubai Municipality · DOT Abu Dhabi
Why bare concrete floors fall short
Bare concrete dusts, stains and wears under forklift traffic. It soaks up oil and chemicals, is hard to clean and gives no way to mark out walkways and zones that last.
An epoxy floor bonds to the prepared slab and forms a seamless, impervious surface. Depending on the use it can be a thin coating, a self-levelling screed or a heavy-duty trowelled system.
The finish can be glossy or matt, smooth or anti-slip, and walkways, hatched zones and colour coding are part of the floor, not paint on top of it.

- 01
Dust-free and seamless
No joints for dirt and bacteria to collect in.
- 02
Takes the traffic
Resists forklift wheels, impact and abrasion.
- 03
Chemical resistant
Oil, fuel and many chemicals wipe off.
- 04
Safer workplaces
Anti-slip textures, walkways and colour-coded zones.

What an epoxy floor stands up to
- Forklift wear
- Oil & chemicals
- Spills
- 01Bare slabTraffic, oil and chemical spills hit an open, dusty concrete surface.
- 02WornThe surface wears away and contaminants soak deep into the slab.
- 03Sealed floorPrimer, body coat and topcoat: seamless, wipe-clean and hard-wearing.
The system
- Topcoat
- Body coat
- Primer
Scroll to run the scene
How we install it
Survey, preparation, application and inspection by one accountable Unimag team.
01Slab assessment
Moisture, strength, cracks and joints are checked so the right system and preparation are chosen.
02Grinding & preparation
The slab is diamond-ground or shot-blasted with dust extraction to a clean, open profile.
03Repairs & primer
Cracks, joints and holes are filled, and a penetrating primer seals the concrete.
04Body coat
The self-levelling body coat is spread to an even thickness with a pin leveller and de-aired.
05Topcoat & markings
Topcoat, anti-slip where needed, walkways and zone markings, then inspection.
Typical build-up
- TopcoatGloss or matt, optional anti-slip
- Self-levelling body coatSeamless, hard-wearing layer
- PrimerSeals the slab and bonds the system
- Ground concrete slabDiamond-ground, repaired
Typical system shown. Every system is specified per project to the manufacturer's data sheet.
Where we apply it
Typical projects and spaces across the UAE where we install it.

Warehouses & logistics
High-traffic aisles and loading areas.

Factories & plants
Production floors exposed to oil and chemicals.

Garages & workshops
Vehicle bays and pit garages.

Exhibition halls
Large, clean floors for public spaces.
Related projects
Work from Unimag's project record. Photos are illustrative until project photography is added.
All projectsQuestions we are asked
How long does an epoxy floor take to install?
It depends on the area, the system and the slab condition. A typical sequence is preparation, primer, body coat and topcoat with curing time between coats; we plan the programme around your operations, often in zones.
Can epoxy go on an old or damaged slab?
Usually yes, after repairs. We check the slab's moisture and strength, repair cracks, joints and spalls, and choose a system thick enough to suit the substrate and the traffic.
Is an epoxy floor slippery?
A smooth gloss finish can be slippery when wet, so we add anti-slip aggregate where needed, for example in wet areas, ramps and walkways.
Which systems do you use?
We are an approved applicator for Fosroc, Hempel, Jotun, BASF, Chemipaint, Stoncor, Corrotech and Isocrete. We recommend a system to suit the structure and use, or apply the system your consultant has specified.
What do we receive at handover?
Inspection and test records for the work carried out, together with the manufacturer's warranty documentation for the system applied.
Talk to our technical team
Send drawings, a specification or a BOQ.
Request a quote +971 4 333 8000info@unimag.aeGet the right system for your project.
Share your drawings, specification or BOQ and our technical team will recommend a system and send a method statement and quotation.


